Before you Begin-
Architecture
These instructions are for installing Red Hat Enterprise Linux 6 (RHEL6) on a 32-bit and 64-bit systems (x86_64).
Minimum Memory
Red Hat recommends for 32 bit a minimum of 1GB memory/logical CPU, and for 64 bit a minimum of 1GB of memory, 1GB/logical CPU.
Minimum Disk Space
minimum disk size of above 12 GB, and a minimum root partition ("/") size of about 9 GB.
CDROM Drive
Red Hat does not include a floppy version of the boot images for RHEL6. Your system will need a boot-capable CDROM drive.
INSTALLATION STEPS OF LINUX/CENTOS 6 –
1.Boot from the RHEL6 DVD. At the boot screen, press the "Enter" key.
2. Press the "tab" key to move focus to the "Skip" key, then press the "Enter" key to continue.3. On the "Welcome" screen, click the "Next" button.
4. Select the appropriate language, then click the "Next" button.
5. Select the relevant keyboard setting, then click the "Next" button.
6. Select the storage option necessary for the installation i.e. Basic storage device, then click the "Next" button.
7. Enter a fully qualified host name “dipak.example.com”, then click the "Configure Network" button.
Check the "Connect automatically" checkbox. If you are not using DHCP, click on the "IPv4 Settings" tab, set the method to "Manual", click the "Add" button and enter the appropriate network details.IP: 192.168.0.5 Netmask:255.255.255.0 Gateway:192.168.0.1 then click the Apply button.
8. Select the relevant time zone by clicking on your nearest city on the map. Click on the "Next" button to proceed.
9. Enter a root password for the server, then click the "Next" button to proceed.
10. Check the partitioning type you require. Click on create custom layout
11.Then created the following partitions
/root -12gb
/temp-4 Gb
/i01-15Gb
/swap-2gb (1.5 of RAM)
/undotbs-512mb
/temptbs-512mbs
/redoA-512mb
/redoB-512mb
/redoC-512mb
/index- 1024mb
*Please be advised i have used the above partition structure keeping in mind of production servers.
13.Then select the following packages.(Gcc,lib,compat,sys)
- Base System > Base
- Base System > Client management tools
- Base System > Compatibility libraries
- Base System > Hardware monitoring utilities
- Base System > Large Systems Performance
- Base System > Network file system client
- Base System > Performance Tools
- Base System > Perl Support
- Servers > Server Platform
- Servers > System administration tools
- Desktops > Desktop
- Desktops > Desktop Platform
- Desktops > Fonts
- Desktops > General Purpose Desktop
- Desktops > Graphical Administration Tools
- Desktops > Input Methods
- Desktops > X Window System
- Development > Additional Development
- Development > Development Tools
- Applications > Internet Browser
Don't worry too much about getting every package you might ever want -- you can always add additional packages later.
want to eject your boot CDROM prior to rebooting so you don't boot back to the boot iso image.
The final installation screen has a 'reboot' bottom on the right corner. Again, make sure to remove any CDROM left in the drive from the initial boot of the installation program.
The first time you boot your newly-installed system in the graphical run level (run level 5) the Red Hat Welcome screens may automatically run.
If you are planning to taylor your system you can skip most or all of these steps -- they are either unneeded or will be handled by taylor.
The welcome screens are intended for stand-alone systems and guides you through a number of first time system administration tasks such as:
· License Information
You'll need to agree to the License agreement.
· Set Up Software Updates
If running Taylor, then choose 'no'. (You'll need to confirm 'No Thanks'.)
· Create User, (a non-admin local account)
For the Create User screen 'Forward' button with no additions or adjustments. You'll need to confirm you want to continue without a user account.
· Date and Time
Accept the defaults.
· Kdump
· Accept the defaults. Do not choose to reboot to enable kdumps.
On the next screen, you'll click on 'Other..' enter 'root' as the user and password you picked earlier. You'll see messages related to being logged in as root, and how it's not ideal, but this okay for this one time.
Once the installation of RHEL6 is done, We have to do following configuration of RHEL6 for oracle 11g installation –
Once the installtion of RHEL6 is done, We have to do following configuration of RHEL6 for oracle 11g installation-
A. We have to disable selinux from this file:
#vi /etc/selinux/config
Set selinux=disabled and save the file.
#service iptables stop
#service iptables save
B. Disable the firewall.
Then restart the service
#service network restart
C. Then we have to configure Yum
1.#mkdir /YUM
2.mount RHEL6 DVD
2.mount RHEL6 DVD
3.#mount /dev/cdrom/media
4.Go to the mounted diretory
#cd /cdrom/media
5.copy all contents of DVD to /YUM
#cp –av * /YUM
6. 5.Install createrepo package with dependancies
#rpm -ivh deltarpm-**.el6.x86_64.rpm
#rpm –ivh python-deltarpm-**.el6.x86_64.rpm
# rpm –ivh createrepo-**.rpm
7. 6.install FTP server
rpm -ivh vsftpd-2.2.2-6.el6.x86_64.rpm
8. 7.Create repository using
#createrepo -v /YUM
8.Create a repo file in /etc/yum.repos.d/
#cd /etc/yum.repos.d/
#cp rhel-source.repo rhel.repo
#vi rhel.repo
Edit the file
[rhel]
Name=Red Hat Enterprise Linux
Baseurl=file:///YUM
Enabled=1
Gpgcheck=0
:wq
#yum list
STEP 1: Download the software
http://www.oracle.com/technetwork/database/database-technologies/express-edition/downloads/index.html
STEP 2: Prerequisites
There are many prerequisites to installing Oracle 11gR2 and the following are the steps I took.
Update /etc/sysctl.conf
#vim /etc/sysctl.conf
Scroll to the bottom and add the following:
# ###########################
# ORACLE PARMS
# ###########################
# ###########################
# ORACLE PARMS
# ###########################
fs.suid_dumpable = 1
fs.aio-max-nr = 1048576fs.file-max = 6815744kernel.shmall = 2097152kernel.shmmax = 536870912kernel.shmmni = 4096# semaphores: semmsl, semmns, semopm, semmnikernel.sem = 250 32000 100 128net.ipv4.ip_local_port_range = 9000 65500net.core.rmem_default=4194304net.core.rmem_max=4194304net.core.wmem_default=262144net.core.wmem_max=1048586#P.S. There is another kernel.shmmax and kernel.shmall parameters.Make sure to put # before them or the new values wont work.
Run the following command to change the current kernel parameters./sbin/sysctl -pUpdate /etc/security/limits.conf
#vim /etc/security/limits.conf
Scroll to the bottom and above the “# End of file” line, add:
Scroll to the bottom and above the “# End of file” line, add:
oracle soft nproc 2047oracle hard nproc 16384oracle soft nofile 4096oracle hard nofile 65536oracle soft stack 10240Add users and groups
groupadd -g 501 oinstallgroupadd -g 502 dba useradd -u 502 -g oinstall -G dba oraclepasswd oracle Amend the "/etc/security/limits.d/90-nproc.conf" file as described below. # Change this* soft nproc 1024 # To this* - nproc 16384Set secure Linux to permissive by editing the "/etc/selinux/config" file, making sure the SELINUX flag is set as follows.SELINUX=permissive Once the change is complete, restart the server.If you have the Linux firewall enabled, you will need to disable it.
Edit host file & edit the following things at last line-
#Vim /etc/hosts
192.168.0.5 soumya.example.com soumya
Edit network file & edit the following things-
#Vim /etc/sysconfig/network
NETWORKING=yes
NETWORKING_IPV6=yes
HOSTNAME=soumya.example.com
:wq
#hostname soumya.example.com
mkdir -p /i01/app/oracle/product/11.2.0/db_1chown -R oracle:oinstall /i01chmod -R 775 /i01chown -Rf oracle:oinstall /redoA
chown -Rf oracle:oinstall /redoBchown -Rf oracle:oinstall /redoBchown -Rf oracle:oinstall /undotbschown -Rf oracle:oinstall /temptbs
chown -Rf oracle:oinstall /index chmod -Rf 775 /redoAchmod -Rf 775 /redoBchmod -Rf 775 /redoCchmod -Rf 775 /undotbschmod -Rf 775 /temptbs
chmod -Rf 775 /index Switch to the Oracle software directory and setup the permissions there:
cd /root/Desktop/Oraclesoftware
chown -R oracle:oinstall database
chmod -R 775 database
Set up the oracle user environment
su oracle
vi /home/oracle/.bash_profile
***Add the following (use hostname from the command line to get your hostname and use the correct paths for your install):
export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_HOSTNAME={Enter your hostname}
export ORACLE_UNQNAME={Enter your DB name}
export ORACLE_BASE=/i01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1
export ORACLE_SID={Enter your DB name}
export PATH=/usr/sbin:$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib:/usr/lib64
export CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
vi /home/oracle/.bash_profile
***Add the following (use hostname from the command line to get your hostname and use the correct paths for your install):
export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_HOSTNAME={Enter your hostname}
export ORACLE_UNQNAME={Enter your DB name}
export ORACLE_BASE=/i01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1
export ORACLE_SID={Enter your DB name}
export PATH=/usr/sbin:$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib:/usr/lib64
export CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
Login as root and issue the following command.
xhost +soumya.example.com
Oracle has a list of dependencies which have to be verified. In the list below, those dependencies which had to be installed using yum are noted with (*):
binutils-2.17.50.0.6
compat-libstdc++-33-3.2.3 (*)
elfutils-libelf-0.125
elfutils-libelf-devel-0.125 (*)
gcc-4.1.2
gcc-c++-4.1.2 (*)
glibc-2.5-24
glibc-common-2.5
glibc-devel-2.5
glibc-headers-2.5
ksh-20060214 (*)
libaio-0.3.106
libaio-devel-0.3.106
libgcc-4.1.2
libgomp-4.1.2
libstdc++-4.1.2
libstdc++-devel-4.1.2
make-3.81
numactl-devel-0.9.8.i386 (*)
sysstat-7.0.2 (*)
binutils-2.17.50.0.6
compat-libstdc++-33-3.2.3 (*)
elfutils-libelf-0.125
elfutils-libelf-devel-0.125 (*)
gcc-4.1.2
gcc-c++-4.1.2 (*)
glibc-2.5-24
glibc-common-2.5
glibc-devel-2.5
glibc-headers-2.5
ksh-20060214 (*)
libaio-0.3.106
libaio-devel-0.3.106
libgcc-4.1.2
libgomp-4.1.2
libstdc++-4.1.2
libstdc++-devel-4.1.2
make-3.81
numactl-devel-0.9.8.i386 (*)
sysstat-7.0.2 (*)
After Successful installation of Linux/CentOS6. We will be install & used X-manager in window system to graphically export Linux screen in window to install Oracle 11g.
Xmanager is a powerful and easy-to-use PC X server that runs on Windows platforms. It allows you to bring remote Unix/Linux desktops to your Windows PC seamlessly. You can also run remote X applications securely through the SSH (Secure Shell) protocol even when your Windows PC is inside a private network and a firewall is between your PC and the remote server. so basically it will allow you to connect to any network/system having Unix/Linux OS installed from your windows machine and thus give you the ability to work at your own place using your own system.
Getting Started: Download, Install and Start with XDMCP
Download Xmanager Enterprise
Download Xmanager
Installation
1. When you execute the downloaded file, InstallShield Wizard will begin the installation process.
2. Follow the instruction of InstallShield Wizard. If you have purchased Xmanager license, please use the product key that you have received from us to install. Otherwise, use 'evaluation' for the product key.
3. When the install is completed, Xmanager 4 icon will be placed on the desktop.
Start with XDMCP(Xbrowser)
To access a full graphic desktop of remote Unix/Linux server, go through the following steps to start with the XDMCP connection method. You can also start with Xstart if you need to run only a single remote X application instead of a full desktop.
Connecting and executing remote X application with Xstart
With Xstart you can create a session that executes a remote X application. Once you have created an Xstartsession, you can bring a remote X application on your Windows with a single click.
1. From the Xmanager folder, run Xstart. RESULT: The Xstart window opens.
2. Click New. RESULT: A New Session dialog box appears.
3. Enter a new session name, and click OK.
4. In the Host box, enter the hostname or IP address of the remote Linux/Unix host.
5. In the Protocol box, select an appropriate protocol that is available on the host. The SSH protocol is appropriate for most hosts.
6. To set up protocol-specific options such as port and time-out, click Setup.
7. In the Username box, enter the user account on the host.
8. Select an Authentication type from the Authentication list.
9. To set up Authentication-specific options such as password and public key, click Setup.
10. In the Execution Command box, enter a command that will be executed on the host. For example, enter the following to run an xterm:
/xterm -ls -display $DISPLAY
11. Click Run. RESULT: An xterm window opens.
12. After login through x-manager, you can check it by running a command as root
user
# xclock
The output will show graphical clock. It means its working fine. To perform Oracle Installation process switch to ORACLE user.
# su - oracle
STEP 3: Install Oracle in RHEL6/centOS6
$cd /root/Desktop/Oracle software/database
./runInstaller
./runInstaller
Installation steps of oracle:-
*1. Provide your email address and Oracle support password to get security updates from Oracle.
*2. . Installation options like creating a database, installing oracle software only or upgrading the database. Select "Create and configure a database".
*3. Choose the system class here. Select "Server Class" it provides more advanced options.
*4. Choose from creating a single node installation from node selections.
*5. Choose your installation type Typical .
*6. If you choose typical install in previous screen, then you will see this page for Install Configurations. Provide Oracle software installation location, database files location and administrator password etc.
*7. Specify the Oracle install inventory location and Operating system group "oinstall".
*8. Now all prerequisite checks will be performed here and if every thing is ok you will be moved to the install summary page. You can hit the "Back" button and come back to see the status of all the checks performed.*9. Installation Summary page. Hit "Finish" to start the Installation.
*10. Installation Progress. This will take several minutes and it will automatically invoke Database COnfiguration Assistant to create a database.
*11. Database Configuration Assistant invoked by the installer.
*12. Once DBCA has finished creating the database, it will show a page like this. It is a summary of the database that has just been created.
*13. As a last step you will be asked to execute some configuration scripts as root.
Open another console and login as root. Execute following once logged in successfully.
# /i01/app/oraInventory/orainstRoot.sh# /i01/app/oracle/product/11.2.0/db_1/root.sh *14. When configuration scripts are executed successfully by root press OK in the installer and you will see this "Finish" page. Note down the management URL and press "Close".
Nenhum comentário:
Postar um comentário